Edge Of Dock
The Blue Giant Drive-Through Application was designed to protect perishable and temperature-sensitive products from contamination and exposure to the elements.
With the Drive-Through Application, the Blue Giant Vertical Storing Dock Leveler is combined with a vehicle restraint and dock seal or shelter to ensure that the cold chain remains uninterrupted even when the cargo reaches its destination.
MD-CH Series Hydraulic Model
Edge-of-Dock MD-CH Series Hydraulic
30,000 lb (13,636 kg) Rated Capacity
The MD-CH Series hydraulic edge-of-dock leveler from Blue Giant is ideally suited for applications where installation of pit levelers is not feasible or where standard fleet bed heights are serviced at the loading dock. The MD-CH Series is easily installed to the dock face providing an efficient self storing docking unit, with ease of use at the touch of a button.
MD-CM Series Mechanical Model
Edge-of-Dock MD-CM Series Mechanical
20,000 or 30,000 lb ( 9,090 or 13,636 kg ) Rated Capacities
The MD-CM Series edge-of-dock leveler from Blue Giant is ideally suited for applications where installation of pit levelers is not feasible or where standard fleet bed heights are serviced at the loading dock. The MD-CM Series is easily installed to the dock face providing an efficient self storing docking unit, replacing cumbersome dock plates.
“HED” SERIES HYDRAULIC EDGE OF DOCK LEVELER
The “HED” Series represent a low cost hydraulically operated unit that bridges the gap between building and truck where a minimal variance exists between dock and truck with a recommended working range of +/-3” and a maximum operating range of +/-5” above and below dock level. A standard Nema 4 single pushbutton control provides easy activation of deck and lip. The “HED” has quiet dependable operation via a two cylinder design with deck and lip cylinders. The motor/pump mounts in readily accessible area on a shelf under the unit. The “HED” comes complete with automatic and hydraulic restore functions. Once trailer pulls away unit automatically stores and if trailer stays at dock unit can be stored hydraulically without the need to move trailer. It is Post Office approved with use of 3” high runoff guard for mail cart and personnel protection. Usage of an available 17” lip allows the HED to service refrigerated trailers.
Features:
- Nema 4 single button control panel provides easy push button operation for smooth, consistent operation
- Full hydraulic control and operation via a dual cylinder design with lip and deck cylinders
- Cold rolled steel hinge pins and secondary gussets for added strength and longevity
- Grease fittings throughout unit
- High strength steel safety tread plate for deck and lip 55,000 lb yield tensile
- Heavy duty bumper blocks with Tuf-Cord bumpers – projection of 18” from wall
- 15” yieldable lip
- Recommended working range of +/-3” and a maximum operating range of +/-5” above and below dock level
Hydraulic & Manual Levelers
Xtra Dock Safety - XDS series
The Blue Giant Xtra Dock Safety (XDS) series is the industry's first interlocked dock safety combination. The heavy-duty hydraulic dock leveler supports extended-usage applications, and the Door and Dock Guard (DDG) acts as a safety barrier to prevent forklift roll-off and overhead door damage.
U-Series Air Cylinder Dock Leveler
Pit Style U-Series Air Cylinder
30,000 to 45,000 lb (13,636 to 20,455 kg) Rated Capacities
The U-Series Air Cylinder Dock Leveler (patent pending) from Blue Giant is technologically innovative and an industry first. This groundbreaking new dock product uses the power of air to deliver the same optimum performance that makes Blue Giant dock levelers an industry standard.
U-Series Air Bag Dock Leveler
Pit Style U-Series Air Powered
30,000 to 45,000 lb (13,636 to 20,455 kg) Rated Capacities
The Blue Giant U-Series airbag dock leveler (patent pending) combines our advanced, environmentally friendly air lifting system with the durable structural design that’s made us a global leader in the design, manufacture, and distribution of loading dock systems.
A-Series Hydraulic Dock Leveler
Pit Style / A-Series Hydraulic
30,000 to 80,000 lb (13,636 to 36,364 kg) Rated Capacities
Strength is the hallmark of Blue Giant. We deliver one of the highest strength ratios in the industry with features like high tensile steel. We incorporate a minimum of 6 I-Beam deck supports in all A-Series Dock Levelers. At higher capacities that increases to 8 I-Beams. I-Beams offer greater strength support.
U-Series Hydraulic Dock Leveler
Pit Style U-Series Hydraulic
30,000 to 45,000 lb (13,636 to 20,455 kg) Rated Capacities
Superior quality, ease of operation, and advanced safety features make the Blue Giant
U-Series hydraulic dock leveler an ideal choice for increased productivity at the loading dock.
A-Series Mechanical Dock Leveler
Pit Style A-Series Mechanical-M
30,000 to 50,000 lb (13,636 to 22,727 kg) Rated Capacities
Strength is the hallmark of Blue Giant. We deliver one of the highest strength ratios in the industry with features like high tensile steel. We incorporate a minimum of 6 I-Beam deck supports in all A-Series Dock Levelers. At higher capacities that increases to 8 I-Beams. I-Beams offer greater strength support.
Blue Giant I-Beam mechanical dock leveler
is a heavy-duty workhorse that can meet the challenges of the busiest loading docks.
Rated capacity of 50,000lbs (22,727kgs)
The I-Beam mechanical dock leveler has an innovative design that enables it to tilt up to 4" (102mm) on either side when under load, allowing full width contact between the lip and truck bed. This unique feature, Assured Motion Float, prevents damage to forks, tires, steering system and load, thereby prolonging the working life of the dock leveler and improving cost of ownership.
"H" Series Autodok® HEAVY DUTY HYDRAULIC
The “H” Series is structurally designed for the most demanding applications with easy push button convenience for smooth, consistent operation plus outstanding toughness and dependability in your most challenging dock operations. McGuire offers a hydraulic dock leveler to meet any of your dock equipment needs while providing low lifetime ownership costs and years of trouble free service with the industry’s best built-in safety. They are most often mounted in a pre-formed pit at the dock commonly used to reduce the grade between the dock floor and the trailer bed. Various sizes and capacities allow for a large amount of flexibility. Hydraulic levelers have added safety features and save time in operation and maintenance. They come in 6’, 6’6” & 7’ standard widths and 6’, 8’ & 10’ standard lengths with 12’ and other lengths available. Standard capacities for the “H” Series are 45K, 55K, 75K and 100K CIR (Comparative Industry Rating).
Features:
- Easy push button operation control panel for smooth, consistent operation with a hydraulic system that provides for full float at all positions
- Positive lip extension and retraction with true regenerative hydraulic control
- Below dock end load capability with fully yieldable lip
- Full width rear hinge mounted in compression with structural channel support
- Structural “C” & “I” beam deck supports
- 4-way high tensile 50,000 minimum yield A572 safety tread plate for deck and lip
- Velocity fuse hydraulic fail safe stops platform within 1” to 3” in free fall situation
- Sub frame design allows for easy pit clean out
- Integral maintenance strut is lockout/tagout compliant
- Standard operable range of 12” above dock level and 12” below dock level
- Full range toe guards
“HP” SERIES STANDARD DUTY HYDRAULIC
The “HP” Series is designed with dependability and toughness in mind for your medium to lighter duty applications. The “HP” offers the same easy push button smooth, consistent operation as the heavy duty H series and the same built in safety, durability and toughness. Easy clean out and servicing are features of all McGuire levelers. Your budget, your safety and trouble free service are always number one with McGuire. They are also most often mounted in a pre-formed pit at the dock commonly used to reduce the grade between the dock floor and the trailer bed. Various sizes and capacities allow for a large amount of flexibility. Hydraulic levelers have added safety features and save time in operation and maintenance. They come in 6’, 6’6” & 7’ standard widths and 6’, 8’ & 10’ standard lengths with 12’ and other lengths available. Standard capacities are 25K, 30K, 35K and 40K CIR (Comparative Industry Rating).
Features:
- Easy push button operation control panel for smooth, consistent operation with a hydraulic system that provides for full float at all positions
- Positive lip extension and retraction with true regenerative hydraulic control
- Below dock end load capability with fully yieldable lip
- Full width rear hinge mounted in compression with structural channel support
- “C” channel heavy duty beam deck supports
- 4-way high tensile 50,000 minimum yield A572 safety tread plate for deck and lip
- Velocity fuse hydraulic fail safe stops platform within 1” to 3” in free fall situation
- Sub frame design allows for easy pit clean out
- Integral maintenance strut is lockout/tagout compliant
- Standard operable range of 12” above dock level and 12” below dock level
- Full range toe guards
Dock Accessories
-
Inflatable Shelter
Blue Giant inflatable shelters come in a variety of styles. Rugged and practical air-inflated designs protect the building walls and tighten the contact area against the trailer, enabling a climate-controlled facility. Custom sizes and projections available.
-
Rain Shroud
Blue Giant rain shrouds have a foam wiper blade that creates a tight seal against trailer tops, keeping rain water out of the cross-docking area. Can be retrofitted to an existing unit.
DS100/DS140
| Pad Design: | High density polyurethane foam bonded to quality treated wood framing | |
| 22 oz, 40 oz or 50 oz vinyl-coated polyester fabric 24" high head curtain with 24" splits and hook & loop fasteners (DSI40 only) |
||
| Full length 3" wide yellow guide stripe on side panels | ||
| Nylon mesh breather panels on side and head pads Side and top seals available with beveled edges |
||
| Colors: | Standard color is black. Optional brown, blue green (50 oz vinyl available black only) | |
| Hardware: | Rust-resistant mounting hardware | |
| Warranty: | 1 year |
DS200
| Pad Design: | Pressure treated wood framing with translucent fiberglass top and 32 oz vinyl sides | |
| 40 oz vinyl-coated fabric top and side face curtains mounted over a rigid frame | ||
| Head curtain with vinyl-coated wear pleats at each end; sloped header to provide drainage; exterior frame corners trimmed with aluminum angle | ||
| PVC bottom panels with highly visible yellow guide stripe | ||
| Colors: | Standard color is black. Optional brown, blue green (50 oz vinyl available black only) | |
| Guards: | Two 6" steel channel guards to support and protect frame | |
| Hardware: | Rust-resistant mounting hardware | |
| Warranty: | 1 year |
Subcategories
|
Call Golden State Local Direct Toll Free Have Golden State Call You Yes, a Golden State Garage Door Pro Can CONTACT ME |
CONTACT US|
|
Serving All of San Diego County!
East County
Bostonia, Del Cerrov, El Cajon, Fletcher Hills, Granite Hills, Hillsdale, Jamacha, La Mesa, Lakeside, Lemon Grove, Mount Helix, Ramona, Santee, Spring Valley, Winter Gardens
San Diego | Central
Allied Gardens, Bay Park, City Heights, Clairemont, College Area, Coronado, Downtown, Encanto, Golden Hill, Grossmont, Hillcrest, Kearny Mesa, Kensington, Lincoln Park, Linda Vista, Little Italy, Logan Heights, Mira Mesa, Miramar, Mission Hills, Mission Valley, Normal Heights, North Park, Oak Park, Old Town, Poway, Rancho Bernardo, Rancho Penasquitos, Rolando, Village, San Carlos, Scripps Ranch, Serra Mesa, Skyline, Sorrento Valley, Talmadge, Tierrasanta, University City
North County
4S Ranch, Black Mountain, Bressi Ranch, Cardiff-by-the-Sea, Carlsbad, Carmel Valley, Del Mar, Encinitas, Escondido, Fairbanks Ranch, La Costa, Leucadia, Oceanside, Olivenhain, Rancho Bernardo, Rancho Penasquitos, Rancho Santa Fe, San Elijo Hills, San Marcos, Solana Beach, Vista
Coastal
Bird Rock, La Jolla, Liberty Station, Mission Beach, Mission Bay, Ocean Beach, Pacific Beach, Point Loma, Sunset Cliffs, UTC / La Jolla
South Bay
Bonita, Castle Park, Chula Vista, East Lake, East Lake Greens, Imperial Beach, Lynwood Hills, National City, Otay Mesa, Paradise Hills, Rancho Del Rey, San Ysidro
And More!
