Golden State Door Co.

       Coiling Steel & Roll-up Sheet Doors  

  

    Constructed from 26ga by 24 in wide sheets of steel roll formed with integral grooves that are hemmed together to form a continuous sheet guided vertically by roll formed guides. Sheet coils around a spring-loaded shaft above the header as the door is opened. Designed with ease of installation in mind.

160C

Heavy Duty 12" Coil - Literature (PDF)

Curtain Design: 26 gauge corrugated curtain, galvanized and pre-painted with silicone polyester paint.  
Springs Tension: Cam-action spring tension holding device allows quick, easy and equal adjustment.
Springs: Oil tempered helical torsion springs, factory lubricated to minimize friction and corrosion.
Guides: Universal mount 4" deep, 12 guage galvanized steel guides with vinyl guide strip.
Bottom Bar: Roll formed clear acrylic coated galvanized 24 guage steel bottom bar with PVC bulb astragal.
Locks: Slide bolt lock assembly on bottom bar at each end of the door curtain; accepts padlocks.
Operation: Reduced drive chain hoist standard on doors over 10' x 10'.
Colors:

Warranty:
Available in 19 standard colors.

40 year paint warranty against cracking, cheking and peeling. 25 year paint warranty against chalking or fading. 1 year material and workmanship warranty.

155C

Medium Duty 12" Coil - Literature (PDF)

Curtain Design: 26 gauge corrugated curtain, galvanized and pre-painted with silicone polyester paint.  
Springs Tension: Cam-action spring tension holding device allows quick, easy and equal adjustment.
Springs: Oil tempered helical torsion springs, factory lubricated to minimize friction and corrosion.
Guides: Universal mount 2.5" deep, 16 guage galvanzied steel guides with vinyl guide strip.
Bottom Bar: Roll formed clear acrylic coated galvanized 24 guage steel bottom bar with PVC bulb astragal.
Locks: Slide bolt lock assembly on bottom bar at each end of the door curtain; accepts padlocks.
Operation: Reduced drive chain hoist standard on doors over 10' x 10'.
Colors:

Warranty:
Available in 19 standard colors

40 year paint warranty against cracking, cheking and peeling. 25 year paint warranty against chalking or fading. 1 year material and workmanship warranty.

150C

Light Duty 9" Coil - Literature (PDF)

Curtain Design: 26 gauge corrugated curtain, galvanized and pre-painted with silicone polyester paint  
Springs Tension: Ratchet Spring Tensioner allows percise tuning
Springs: Oil tempered helical torsion springs, factory lubricated to minimize friction and corrosion
Guides: 18 gauge roll formed guides with dual polyethylene wear strips
Bottom Bar: Roll formed clear acrylic coated galvanized 24 guage steel bottom bar with PVC bulb astragal
Locks: Zinc coated steel latch accepts all industry padlocks
Operation: Manual Drive; non-rotting rope attached to inside angle. Optional electric operation.
Colors:

Warranty:
Available in 19 standard colors

40 year paint warranty against cracking, cheking and peeling. 25 year paint warranty against chalking or fading. 3 year material and workmanship warranty.

CID

Heavy Duty Polyurethane Insulated Door

Curtain Design: Pre-finished galvanized steel curtain constructed of 24 gauge front and back interlocking roll-formed slats  
Weatherstriping: Vinyl jamb seal, internal hood baffle and tubular compression seal on bottom bar as standard. 
Barrell Assembly: Steel pipe sized to limit deflection to no more than .03" per foot of width, with graduated rings or lugs welded to barrel for curtain attachment.
Springs: Torison springs permanently lubricated and mounted on steel tension shafts; designed for 20,000 cycles minimum.
Hood: Half-hexagonal shape fabricated from 24 gauge steel with intermediate structural supports as required.
Guides: Structural three angles as standard.
Bottom Bar: Mill finish aluminum standard to 16 feet wide; Structural two angle steel for larger doors.
Locks: Wall mounted chain keeper or zinc plated steel slide bolt with padlock provisions.
Operation: Chain Hoist is standard; motor or manual operation is optional.
Colors:

Warranty:
Five colors: white, gray, tan, bronze and orange. All with Galvalume.

3 year warranty against defects in materials and workmanship.  Finish warranted for 25 years against fading, peeling, cracking, blistering, flaking or delaminating.

CSD

Standard Heavy Duty Service Doors

Curtain Design: Pre-finished galvanized steel curtain constructed of 22 gauge interlocking roll-formed flat or curved slats; 24, 20 and 18 gauge steel slats optional.  
Weatherstriping: Vinyl jamb seal, internal hood baffle and tubular compression seal on bottom bar are optional.
Barrel Assembly: Steel pipe sized to limit deflection to no more than .03" per foot of width, with graduated rings or lugs welded to barrel for curtain attachment.
Springs: Torison springs permanently lubricated and mounted on steel tension shafts; designed for 20,000 cycles minimum.
Hood: Half-hexagonal shape fabricated from 24 gauge steel with intermediate structural supports as required.
Guides: Structural three angles as standard; two piece roll-formed galvanzied steel is optional.
Bottom Bar: Mill finish aluminum standard to 16 feet wide; structural two angle steel for larger doors.
Locks: Half-hexagonal shape fabricated from 24 gauge steel with intermediate structural supports as required.
Operation: Chain Hoist is standard; motor or manual operation is optional.
Colors:

Warranty:
Five colors: white, gray, tan, bronze and orange. All with Galvalume.

3 year warranty against defects in materials and workmanship.  Finish warranted for 25 years against fading, peeling, cracking, blistering, flaking or delaminating.

CMD

Medium Duty Service Door

Curtain Design: Pre-finished galvanized steel curtain constructed of 24 gauge front interlocking roll-formed flat or curved slats.  
Weatherstriping: Vinyl guide seal, dual-durometer header seal and tubular compression seal on bottom bar are optional.
Barrel Assembly: Galvanized spiral wound 12" O.D. tube.  Deflection under full load not to exceed .03" per foot of span.
Springs: Torsion springs, stress relieved, grease packed and mounted on steel shafts; engineered for 20,000 cylces minimum.
Hood: Optional square shaped fabricated from 24 gauge steel with intermediate structural supports as required.
Guides: Formed steel box shapes with polyethylene self-lubricating guide runners.
Bottom Bar: Mill finish aluminum is standard.
Locks: Two zinc plated steel slide bolt with padlock provisions.
Operation: Chain Hoist is standard.
Colors:

Warranty:
Five colors: white, gray, tan, bronze and orange. All with Galvalume.

1 year paint warranty against defects in materials and workmansip. Finish warranged for 25 years against fading, peeling, cracking, blistering, flaking, splitting or delaminating.

 

 

 

More Service Doors

CESD10

Standard Heavy Duty Service Door

CESD20

Insulated Heavy Duty Service Door

 

 
 
   

 

 

 

 

Read Unbiased Consumer Reviews Online at AngiesList.comGarage Doors in San Diego Golden State Door Co on Facebook  

 

10540 Kenney St.

Santee CA 92071

619-448-0506

(800)442-9560

General areas served: Alpine, Carlsbad, Chula Vista, Coronado, Del Mar, El Cajon, Encinitas, Escondido, Imperial Beach, La Mesa, Lakeside, Lemon Grove, National City, Oceanside, Poway, San Diego, San Marcos, Santee, Solana Beach, Vista and more...

Contact Goldenstate Door Co. 619-448-0506 ~ (800)442-9560CONTACT US

Call Golden State

(619)448-0506
24/7 Emergency Hotline
(800)442-9560

Have Golden State Call You

Yes, a Golden State Door Co. Repair & Service rep can contact me »