Golden State Door Co.

 

Janus Intl. 

Janus International supplies us with a complete suite of windload and non-windload steel roll-up doors sold and installed by Golden State Door Co. Our Roll-up & Sheet Doors are made of the highest quality materials and are durable enough to withstand the heavy work-out your clients give them. With a suite of over 20 standard and insulated sheet door models, Janus Roll-up & Sheet Doors are engineered to address the specific needs that our customers come to expect.

 

Janus-Model 1000-1000I- 1100-1100I.jpg

 

 

 

Model 1000 / 1000I The Pre-Assembled Industrial Door

Download the Brochure pdf

Model 1100 / 1100I The Pre-Assembled Industrial Door pdf

Light duty applications for frequent usage, Utilizes 9 ½” drum wheelMaximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and electric operations

Model 1950 / 1950I Commercial Sheet Door

Download the Brochure pdf

Applications suitable for frequent usage, Utilizes 9 ½” drum wheel Maximum opening size of 12’ wide x 14’ high (168 sq.ft.), Push-up, hand chain and electric operations

Model 1950 HD Heavy Duty Commercial Sheet Door

Download the Brochure pdf

Utilizes 12” drum wheel

Model 2000 / 2000I Commercial Sheet Door

Download the Brochure pdf

Utilizes 12” drum wheel, Maximum opening size of 18’ wide x 18’ high (324 sq.ft.), Push-up, hand chain and electric operations

Model 2500 / 2500I Heavy Duty Commercial Sheet Door

Download the Brochure pdf

Non-wind certified with wind lock, Utilizes 12” drum wheel Limited maximum size of 20’ wide x 18’ high (360 sq.ft.) , Push-up, hand chain and electric operations

Model 3000 / 3000I Non-certified Wind Load Door

Download the Brochure pdf

Designed to meet stringent building codes in coastal regions, Utilizes 12” drum wheel

Model 3100 / 3100I Certified Wind Load Rated Rolling Sheet Door

Download the Brochure pdf

Designed to meet stringent building codes in Miami-Dade County. Utilizes 12” drum wheel , Maximum opening size of 12’ wide x 18’ high (216 sq.ft.)  Push-up, hand chain and electric operations, PSF Ratings: +43 PSF and -49 PSF

Model 3400 / 3400I Miami-Dade County Certified Wind Load Rated Rolling Sheet Door

Download the brochure pdf

Designed and tested to meet wind load requirements of the International Building Code and Florida Building Code (FL14425), Utilizes 12” drum wheel, Maximum opening size of 18’ wide x 20 ’ high (360 sq.ft.), Push-up, hand chain and electric operations

Model 3652 Wind Load Certified Commercial Nylon Windlock Rolling Sheet Door

Download the Brochure pdf

The Janus Pantheon Operator is a stronger and easier to install DC motor operator for today's door industry, featuring a simple floor level manual release system, soft start and soft stop operation.
The Janus Pantheon Operator is a stronger and easier to install DC motor operator for today's door industry, featuring a simple floor level manual release system, soft start and soft stop operation.

Pantheon Commercial Operators pdf
Pantheon Mini Operators pdf

 

Series 650 Mini Storage Door

Series 650 Mini Storage Door

The Janus International Corporation Model 650 Mini Storage Roll up Door is designed and manufactured with durability, quick installation, ease of maintenance in mind. Standard features eliminate the need for upgrades and additional charges.

Click here for more information

 


Series 750 Certified Wind Load Mini Storage Door

Series 750 Certified Wind Load Door

Janus International Corporation has achieved windload certification with the Series 750 Roll Up Door. The Series 750 Door was designed to meet stringent windload requirements for mini warehouse applications while still providing the best door operation in the industry. The innovative door design has minimized the locking and reinforcement needed to strengthen the door to pass rigorous windload testing. FL#12765.5 (to 3’-0” wide);  FL#12765.6 (to 6'-0" wide) and FL#12765.8 (to 10'-0" wide).

Click here for more information


Swing Doors

 
 

            SECURITY AND STRENGTH     

Porvene-model 200

SERIES 200

THE ORIGINAL”
Rolling Steel Sheet Doors
 

MODEL 211-COMMERCIAL / MODEL 231-INDUSTRIAL
MODEL 232-INSULATED / MODEL 233-WINDLOCKED®
MODEL 234-INSULATED / WINDLOCKED®

Porvene-model 300

SERIES 300

“COMMERCIAL SLAT DOOR
Rolling Steel

ECONOMY - QUALITY - 24 GA/22 GA

Porvene-model 400

MODEL 400

“SERVICE DOOR
Rolling Steel

AVALAIBLE IN - 24/22/20/18 GAUGE

Porvene-model 600

MODEL 600

SERVICE DOOR
Rolling Steel Insulated

AVALAIBLE IN - 22/24 standardor 20/24 optional GAUGE

   
 

       Coiling Steel & Roll-up Sheet Doors  

  

    Constructed from 26ga by 24 in wide sheets of steel roll formed with integral grooves that are hemmed together to form a continuous sheet guided vertically by roll formed guides. Sheet coils around a spring-loaded shaft above the header as the door is opened. Designed with ease of installation in mind.

160C

Heavy Duty 12" Coil - Literature (PDF)

Curtain Design: 26 gauge corrugated curtain, galvanized and pre-painted with silicone polyester paint.  
Springs Tension: Cam-action spring tension holding device allows quick, easy and equal adjustment.
Springs: Oil tempered helical torsion springs, factory lubricated to minimize friction and corrosion.
Guides: Universal mount 4" deep, 12 guage galvanized steel guides with vinyl guide strip.
Bottom Bar: Roll formed clear acrylic coated galvanized 24 guage steel bottom bar with PVC bulb astragal.
Locks: Slide bolt lock assembly on bottom bar at each end of the door curtain; accepts padlocks.
Operation: Reduced drive chain hoist standard on doors over 10' x 10'.
Colors:

Warranty:
Available in 19 standard colors.

40 year paint warranty against cracking, cheking and peeling. 25 year paint warranty against chalking or fading. 1 year material and workmanship warranty.

155C

Medium Duty 12" Coil - Literature (PDF)

Curtain Design: 26 gauge corrugated curtain, galvanized and pre-painted with silicone polyester paint.  
Springs Tension: Cam-action spring tension holding device allows quick, easy and equal adjustment.
Springs: Oil tempered helical torsion springs, factory lubricated to minimize friction and corrosion.
Guides: Universal mount 2.5" deep, 16 guage galvanzied steel guides with vinyl guide strip.
Bottom Bar: Roll formed clear acrylic coated galvanized 24 guage steel bottom bar with PVC bulb astragal.
Locks: Slide bolt lock assembly on bottom bar at each end of the door curtain; accepts padlocks.
Operation: Reduced drive chain hoist standard on doors over 10' x 10'.
Colors:

Warranty:
Available in 19 standard colors

40 year paint warranty against cracking, cheking and peeling. 25 year paint warranty against chalking or fading. 1 year material and workmanship warranty.

150C

Light Duty 9" Coil - Literature (PDF)

Curtain Design: 26 gauge corrugated curtain, galvanized and pre-painted with silicone polyester paint  
Springs Tension: Ratchet Spring Tensioner allows percise tuning
Springs: Oil tempered helical torsion springs, factory lubricated to minimize friction and corrosion
Guides: 18 gauge roll formed guides with dual polyethylene wear strips
Bottom Bar: Roll formed clear acrylic coated galvanized 24 guage steel bottom bar with PVC bulb astragal
Locks: Zinc coated steel latch accepts all industry padlocks
Operation: Manual Drive; non-rotting rope attached to inside angle. Optional electric operation.
Colors:

Warranty:
Available in 19 standard colors

40 year paint warranty against cracking, cheking and peeling. 25 year paint warranty against chalking or fading. 3 year material and workmanship warranty.

CID

Heavy Duty Polyurethane Insulated Door

Curtain Design: Pre-finished galvanized steel curtain constructed of 24 gauge front and back interlocking roll-formed slats  
Weatherstriping: Vinyl jamb seal, internal hood baffle and tubular compression seal on bottom bar as standard. 
Barrell Assembly: Steel pipe sized to limit deflection to no more than .03" per foot of width, with graduated rings or lugs welded to barrel for curtain attachment.
Springs: Torison springs permanently lubricated and mounted on steel tension shafts; designed for 20,000 cycles minimum.
Hood: Half-hexagonal shape fabricated from 24 gauge steel with intermediate structural supports as required.
Guides: Structural three angles as standard.
Bottom Bar: Mill finish aluminum standard to 16 feet wide; Structural two angle steel for larger doors.
Locks: Wall mounted chain keeper or zinc plated steel slide bolt with padlock provisions.
Operation: Chain Hoist is standard; motor or manual operation is optional.
Colors:

Warranty:
Five colors: white, gray, tan, bronze and orange. All with Galvalume.

3 year warranty against defects in materials and workmanship.  Finish warranted for 25 years against fading, peeling, cracking, blistering, flaking or delaminating.

CSD

Standard Heavy Duty Service Doors

Curtain Design: Pre-finished galvanized steel curtain constructed of 22 gauge interlocking roll-formed flat or curved slats; 24, 20 and 18 gauge steel slats optional.  
Weatherstriping: Vinyl jamb seal, internal hood baffle and tubular compression seal on bottom bar are optional.
Barrel Assembly: Steel pipe sized to limit deflection to no more than .03" per foot of width, with graduated rings or lugs welded to barrel for curtain attachment.
Springs: Torison springs permanently lubricated and mounted on steel tension shafts; designed for 20,000 cycles minimum.
Hood: Half-hexagonal shape fabricated from 24 gauge steel with intermediate structural supports as required.
Guides: Structural three angles as standard; two piece roll-formed galvanzied steel is optional.
Bottom Bar: Mill finish aluminum standard to 16 feet wide; structural two angle steel for larger doors.
Locks: Half-hexagonal shape fabricated from 24 gauge steel with intermediate structural supports as required.
Operation: Chain Hoist is standard; motor or manual operation is optional.
Colors:

Warranty:
Five colors: white, gray, tan, bronze and orange. All with Galvalume.

3 year warranty against defects in materials and workmanship.  Finish warranted for 25 years against fading, peeling, cracking, blistering, flaking or delaminating.

CMD

Medium Duty Service Door

Curtain Design: Pre-finished galvanized steel curtain constructed of 24 gauge front interlocking roll-formed flat or curved slats.  
Weatherstriping: Vinyl guide seal, dual-durometer header seal and tubular compression seal on bottom bar are optional.
Barrel Assembly: Galvanized spiral wound 12" O.D. tube.  Deflection under full load not to exceed .03" per foot of span.
Springs: Torsion springs, stress relieved, grease packed and mounted on steel shafts; engineered for 20,000 cylces minimum.
Hood: Optional square shaped fabricated from 24 gauge steel with intermediate structural supports as required.
Guides: Formed steel box shapes with polyethylene self-lubricating guide runners.
Bottom Bar: Mill finish aluminum is standard.
Locks: Two zinc plated steel slide bolt with padlock provisions.
Operation: Chain Hoist is standard.
Colors:

Warranty:
Five colors: white, gray, tan, bronze and orange. All with Galvalume.

1 year paint warranty against defects in materials and workmansip. Finish warranged for 25 years against fading, peeling, cracking, blistering, flaking, splitting or delaminating.

 

 

 

More Service Doors

CESD10

Standard Heavy Duty Service Door

CESD20

Insulated Heavy Duty Service Door

 

 
 
   

 

 

 

 

Cornell Doors

Rolling Steel Doors

Coiling Overhead Service Door Model ESD10


Jump to additional Rolling Steel Door offerings:

Graphics Door
ScreenGard™ Perforated Slat Door
Matadoor® Breakaway Curtain Bottom Section
RapidResponse™ Fast Fix Door
CrossingGard® Emergency Response Service Door
Extreme™ Cycle Life Service Doors

Rolling Steel Doors are metal slatted doors that roll up to store in coil above the opening. They are used to provide security against entry or weather protection at exterior and interior openings in industrial, commercial, institutional and other buildings. They are also called overhead coiling doors or service doors.

Do you have questions regarding the differences between Rolling Doors (Overhead Coiling Doors) vs. Sectional Doors? See these documents:

Rolling Steel Door Benefits:

  • Design Flexibility: Cornell coiling doors are built to order to fit your opening size, operation and option preferences.
  • Space Saving: Coiling doors roll upward and store in a tight coil above the opening for fuller use of the interior space. This reduces interference with other building components.
  • Low Life Cycle Cost: Cornell’s rugged construction and quality materials assure long life and less costly maintenance.

Rolling Door Sizes: 30' wide, 30' high standard construction. Large Openings to 50' wide, 40' high, consult factory.

Rolling Door Operation: Motors, chain, hand-crank or push-up designs based on size, weight or frequency of operation.

Usage: Standard construction for coiling doors is up to 20 cycles per day with High Cycle Construction available for doors expected to be operated more than 20 cycles per day, i.e., parking garages, sally ports.

Fast Acting Doors: For high traffic openings or where air flow or temperature control is critical, doors can be designed to operate at more than twice the speed of typical doors, or up to 2 ft./sec.

Wind Load: Cornell coiling doors can be configured to withstand the full range of specific wind load requirements including missile impact ratings. Also refer to the Wind Load Construction section.

Seismic Performance Validation: Cornell can provide project specific seismic calculations for all coiling doors that are mounted Face of Wall or Between Jambs to steel or masonry. Seismic performance validation is per ASCE 7-05.

Materials and Finishes: Standard door curtains are available in 24, 22, 20 and 18 gauge galvanized steel with exclusive GalvaNex™ finish in light gray, tan or white. Also 20 gauge 300 series stainless steel with #4 finish or #16 B&S gauge aluminum with mill, clear or color anodized finish. SpectraShield® powder coating optional. Additional Material and Finishes information

Subcategories

Read Unbiased Consumer Reviews Online at AngiesList.comGarage Doors in San Diego Golden State Door Co on Facebook  

 

10540 Kenney St.

Santee CA 92071

619-448-0506

(800)442-9560

General areas served: Alpine, Carlsbad, Chula Vista, Coronado, Del Mar, El Cajon, Encinitas, Escondido, Imperial Beach, La Mesa, Lakeside, Lemon Grove, National City, Oceanside, Poway, San Diego, San Marcos, Santee, Solana Beach, Vista and more...

CONTACT US

Call Golden State

(619)448-0506
24/7 Emergency Hotline
(800)442-9560

Have Golden State Call You

Yes, a Golden State Door Co. Repair & Service rep can contact me »

Mike,
  The commercial door looks great and works! Thanks again, your guys were very professional and had the job done fast.
Thanks again Golden State & Hamann!!!!

Satisfied customer for over 13 years

  We've had four services done by Golden State Garage Doors and all have been extremely satisfying. They installed two brand new garage doors and serviced them four times over the past 13 years and everything was great.
They've always showed up on time and we've discussed preventative maintenance with them. Our garage used to have just one spring that goes across the door, but they suggested we get two for more security and we went with that and we're happy with their suggestion. Golden Gate Garage Doors are professional, honest and quick, I highly recommend them!

Great service!

  We had such a great experience with Golden State Garage Doors, even from the first phone call. They responded in a timely manner and were prompt and polite for the initial installation. In fact, we had an issue just last year and they handled everything for us. The on-going maintenance they provide really stands out for me. They don't just drop customers after the initial installation. I absolutely recommend them.

Terrific Job !

The installers did a terrific job and we love the new door. A huge improvement after 28 years of the 2 ton monster. It has been a pleasure doing business with you.
Gary P. (Coronado, CA)

 Just had a great job done by a fine representative of your company. Seth was on time, diligent in getting the job done quickly and professionally. We've had nothing but great success with your firm over the past 15 or so years, and will continue to recommend you to our friends and family.
Mike D. (San Diego, Ca)

 Seth was on-time and extremely courteous and friendly. He found the problem with the garage door opener quickly, made the repair quickly and the charge for the service was fair. We have used Golden State Door Co. in the past for installation and service and have always been more than happy with the service.
Frank and Karen L. ( San Diego, CA)

 Thank you for your excellent service. Everyone in your Golden State Door Company has always been extremely nice to deal with. If all the companies and people we have to do business with gave your type of service, life would be much nicer and easier.
Thelma L. E. (Santee, CA